Checking I-Mark license and registering your I-Mark
Marc Steele
Last Update 2 maanden geleden
Checking your license and registering your I-Mark
Get the most from your I-Mark system with an unlimited system. You can check your machine license and determine if it unlimited or needs to be registered.
Here’s how:
Retrieve your Machine ID number:
1. Ensure the Controller is connected to the operator PC and powered on.
2. Open the I-Mark Software and connect to the Controller as though you were preparing to make a mark.
3. Click on “Diagnostics” and document the 8 character Machine ID. You will need to provide this on the registration form later.
Note: If there are remaining days on your license then registration is required.
On-Line Registration Form
I-Mark Registration (marking-machines.net)
Click the link above to access our online registration form and provide the requested information. The information will automatically be emailed to us at CMT. Allow one business day for a response.
If you have trouble clicking the link, you may also cut and paste http://marking-machines.net/I-Mark_Registration.html in your browser to reach the registration form.
Completing the process
Upon receiving your Registration info, CMT will verify your purchase and supply you with a permanent License Key.
1. With the Controller on and connected to the operator PC, return to “Diagnostics” in the I-Mark Software.
2. Click on “Update Key” in the System Actions group.
3. When the dialog window pops up, simply copy and paste the key CMT provided into the field and click “Submit.”
4. The I-Mark software will do a soft reset of the Controller and be ready to use again.
Note: in some instances, when the Controller reconnects to the
I-Mark software, the Machine ID will not be visible. Simply restart the I-Mark software and power cycle the controller to clear this error.
